Ron Knight is accepting requests for custom solutions
Ron Knight is accepting requests for custom solutions
There are many applications for the marine industry. Anyone who has tried to remove an old bolt or screw from a boat will love what occurs when that same bolt or screw is pretreated prior to placement. The anti-corrosion lubricant in Corrosion Zero will make future removal a breeze.
Testimony from fishermen shows that trolling motors sprayed under the hood prior to use in a saltwater environment will not corrode. Components that used to be replaced every few months are now lasting indefinitely. Recreational boaters have been using Corrosion Zero on their boat trailers with exceptionally long-lasting results.
Treat all internal electronic parts including circuit boards and connectors to extend life and prevent corrosion.
Corrosion Zero is effective on a large range of materials found in computers from aluminum-based alloys to copper contacts electroplated with nickel or even gold that is used for improved resistance
For firearms prior to application, cover the grip/stock and apply Magnum Clean to all metal parts.
Apply it to the magazine; spray it into the chamber and into the barrel. Turn the firearm over and spray (apply) into the weapon through the trigger area. The next step is to take a clean cotton cloth and wipe it all down. Wiping down the weapon will remove any excess lubricant but Magnum Clean protection will remain.
Protect ammunition by spraying or dipping prior to storage. Magnum Clean is extremely effective at high temperatures and in high-humidity environments.
Corrosion Zero and Quik Tann III are the perfect combinations when you’re rebuilding/restoring classic cars or preventing problems on your RVs or motor homes.
Use the product on the undercarriage by brushing, scraping, or blowing off loose rust.
Treat with Quik Tann III Spray; a Milwaukee Sure Shot works great for an area this large.
Use Corrosion Zero in the door jams and Hinges.. Great for the brackets that hold up the mufflers etc. Use Quik Tann III on floorboards that still have a solid metal base.
The cooling coils as well as all internal components can be treated with Corrosion Zero.
Internal circuit boards can be sprayed or dipped prior to installation or replacement.
Corrosion Zero is especially efficient when it comes to metal tools. Tools are often bumped, scratched, dropped, and mishandled in numerous ways. Most products will re-rust in these areas because the product used is dry. Corrosion Zero is an ultra-thin film that remains flexible even when wiped down. Thus the area affected will self-fill, preventing future problems.
Metal tanks that spend their time outside, especially in the northern states rust. Corrosion Zero prevents this from happening. Depending on the size of the tank, either use the aerosol can or the Sure Shot from Milwaukee. You have the option of brushing it on as well but it will be time-consuming.
Over time, batteries will start to leak and Sulfuric Acid will cause the connections to corrode.
This can be prevented by brushing on Super Corrosion Battery Pro. This product comes in a 4oz can with a brush to make the application easy with no cleanup required.
Garden Equipment such as wheel barrels and carts tend to fill with water when left outside. If treated with Corrosion Zero and then wiped down, even standing water will not cause rust. Good for sheers, tree trimmers, rakes, etc.
Use Liquid Sheath to protect your blades from rust and all kinds of corrosion. Squirt a small amount onto your blade or a cloth and wipe it down. No more rust, no more corrosion, and no messy film. Wipe it off and don't worry, the protection is still there. Even your fingerprints won't stick to it! Now you can wear and use your blades in any kind of weather or store them without the worry of corrosion.
Prior to hanging your fans in an outside environment, pretreat with Corrosion Zero. Spray all metal parts.
Steel roof decking will eventually rust. Pretreat with Corrosion Zero when roof is cool to warm. If you can’t lay your hand and keep it on the metal it is too hot to treat. Best to use a large sprayer for a project this size. A Milwaukee Sure Shot or equivalent will work best.
Extend the life of exposed metal pipes by spraying or brushing on Corrosion Zero. Pipes that are going to be placed underground can be sprayed, brushed or dipped.
Corrosion Zero extends the life of all electronic parts and eliminates condensed moisture/ humid air from affecting the radar antennas and components
Every contractor that works outside has had his or her toolbox rust. Spray your toolbox (and all your tools, for that matter.) and wipe it down with Corrosion Zero. Use it, drag it, abuse it. but don’t worry, the product is still there and flexible. It will keep protecting your toolbox and your tools as you use them.
Large and small generators have problems with interiors and exteriors corroding. Especially portable generators. Corrosion Zero can be sprayed on all metal parts inside and out to prevent deterioration.
Treating fasteners prior to storage will prevent rust/corrosion. For large quantities, dipping would be more efficient. Corrosion Zero should be used on all of the following fastener types:
Screws, bolts, nuts, nails, pins, anchors, clamps, clips, latches, clasp, hooks, grommets, mollys, bits, blades, and more.
The flexibility of Corrosion Zero will continue to protect tools even when stored together, banged around, or dropped on concrete floors. The product will re-fill where the fastener become nicked or scratched.
Locomotives and their cars see an environment that can reach temperatures of -40 F to +120 F and all ranges of dryness, rain, snow, and humidity, with acid, salt, metal, and other contaminants along with being subjected to high vibration and g-forces. Corrosion Zero has been used on coupler pins and lugs to prevent corrosion and failures. Great for all electronic and electrical components. Excellent lubrication.
Heavy equipment in construction and manufacturing that are exposed to environments such as rain or salt suffer extensive rust. New equipment can be treated with Corrosion Zero. Equipment that is being repaired and/or serviced can stop decay by using Quik Tann III and then Corrosion Zero. For contacts, controls, hinges etc. use Corrosion Zero only.
Use Corrosion Zero on all electrical switchgear, spindle motors, and disk drives. Also effective on housing boxes.